| 型 號： | |
| 所屬分類： | 泰克_示波器探頭 |
| 報 價： |  |
| 更新時間： | 2024-06-24 |
A621\622、CT1\2\6 、P6021A\6022 示波器電流探頭業內*的性能及第三方安全認證。泰克電流探頭解決方案提供：Z廣的 AC/DC 及僅 AC 電流探頭系列測量準確度從幾 uA 到 2000 A同類Z佳帶寬高至 120 MHz同類Z佳電流箝位靈敏度低至 1 mA符合第三方安全認證的*產品（UL、CSA、ETL）提供裸線電壓額定值的*產品與泰
Features & Benefits
A621
- AC – 5 Hz to 50 kHz
- 100 mA to 2000 A Peak
- For DMMs and Oscilloscopes
- Clamp On
A622
- AC/DC – 100 kHz
- 50 mA to 100 A Peak
- For DMMs and Oscilloscopes
Applications
- Motor Drives
- Inverters
- Power Supplies
- Avionics
A622
The A600 Series current probes high-value current probes are specifically designed to support measurements you make with your TekMeter® or oscilloscope*1.
A621 2000 AMP AC CURRENT PROBE/BNC
This industrial-style clamp-on probe has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can be used on digital multimeters, TekMeter, and scopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.
A622 100 AMP AC/DC CURRENT PROBE/BNC
This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and may be used with a shrouded banana plug adapter*1 so it can also be used on digital multimeters, TekMeter, and scopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.
RECOMMENDED PRODUCTS
TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020*1, DMM4040*1, and DMM4050*1 digital multimeters.
*1 For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.
會員_a.png)